Nikon Service Advisories for the Z5ii, Z6iii, and Zr; Zr Firmware 1.11 By ShunCheung, March 17 1 reply 204 views ShunCheung March 18 Nikon F3 with motor drive MD-4. The Nikon F3, introduced in 1980, is considered one of the great SLR classics. Built to the highest standards, durable, reliable, almost entirely made of metal, embedded in arguably the largest system program for an SLR, and produced for 21 years.
It's no wonder th... The Nikon engineers could have labeled then R1, R2, R3, and R4. When you set the ring to R4 it means that if you shoot at f/4 you will get optimum sharpness on your subject and background bokeh at this setting. Setting it above or below will start to affect the sharpness of the subject.
nikon d3300 nachfolger, <p>Okay, so I never claimed to understand Nikon's R&D or marketing strategy, but can someone help me out here? <br>What exactly does the relatively new 58 mm AFS f/1.4 G prime lens bring to the table that the 50 AFS f/1.4 G can't do, and oh by the way, the 58 mm lens is over 4 tim... Nikon 50 f/1.4 G vs Nikon 58 f/1.4 G, What am I missing I like the SB-28 and SB-28dx even more.<P>The Nikon Speedlights from the SB-23 forward will all work fine with the F4s, The warning about the Sb-24 and the 20mm lens combination is because the flash doesn't have the built in wide angle lens on the flash -- which the SB-25, SB26, SB27, SB28, SB28dx, SB50dx and SB80dx do have. The DOF cannot be an issue if I am comparing the lens to Nikon 70-200, f/2.8 with the zoom fixed at 105mm and the aperture at f/2.8. Since I have had the lens used, I am not sure if this is a problem with my copy in particular or something that is expected of this lens.
nikon d3300 nachfolger, Does anyone have any info on the differences and relative speeds of the various Nikon autofocus systems. I have a N70 - CAM 274. I was looking at the N80 and D70 - CAM 900 and F100 Cam 1300 (also in F5). I noticed some of the newer cameras have a CAM 2000 system.
